Diseño y fabricación de un prototipo de una prótesis para amputaciones de tipo transhumeral que facilite la natación
Authors
Loading...
Date
2024
Directors
Journal Title
Journal ISSN
Volume Title
Publisher
Quevedo:UTEQ
Abstract
El presente proyecto de investigación tiene como objetivo el diseño, simulación y
construcción de un prototipo de prótesis diseñado para facilitar la natación en casos de
amputaciones transhumerales. La primera fase se enfocó en el estudio de los diversos estilos
de natación existentes para seleccionar aquellos a los que sería óptimo adaptar la prótesis.
Luego, se procedió a obtener un modelo del brazo amputado del usuario mediante la técnica
de ingeniería inversa. Posteriormente, se modeló computacionalmente el prototipo para
llevar a cabo las simulaciones pertinentes.
Una vez concluidas las simulaciones, se procedió a la construcción del prototipo utilizando
tecnología de manufactura aditiva. Este prototipo consta de una paleta que está firmemente
unida al mango de sujeción, inicialmente se fabrican tres prototipos con adaptaciones
específicas para llevar a cabo ensayos de tracción, siguiendo las pautas de la norma ISO
22523:2006:2006 (requisitos y métodos de ensayo para prótesis de miembros externos y
ortesis externas), los ensayos de tracción buscan medir la resistencia y durabilidad de la
prótesis.
Este proyecto se enfocó en la combinación de una investigación detallada sobre los estilos
de natación, la aplicación de ingeniería inversa y simulaciones avanzadas para diseñar y
construir una prótesis de natación específicamente dirigida a amputaciones transhumerales.
La utilización de la manufactura aditiva garantiza la precisión en la fabricación del prototipo,
que incluye una paleta sólidamente unida al mango de sujeción para optimizar su
rendimiento en actividades acuáticas.
Description
The aim of this research project is the design, simulation and construction of a prototype
prosthesis designed to facilitate swimming in cases of transhumeral amputations. The first
phase focused on the study of the various existing swimming strokes in order to select those
to which it would be optimal to adapt the prosthesis. Then, a model of the user's amputated
arm was obtained using the reverse engineering technique. Subsequently, the prototype was
computationally modelled in order to carry out the relevant simulations.
Once the simulations were completed, the prototype was built using additive manufacturing
technology. This prototype consists of a paddle that is firmly attached to the grip handle,
initially three prototypes are manufactured with specific adaptations to carry out tensile tests,
following the guidelines of ISO 22523:2006:2006 (requirements and test methods for
external limb prostheses and external orthoses), the tensile tests seek to measure the strength
and durability of the prosthesis.
This project focused on combining detailed research on swimming strokes, the application
of reverse engineering and advanced simulations to design and build a swimming prosthesis
specifically targeted at transhumeral amputees. The use of additive manufacturing ensures
precision in the fabrication of the prototype, which includes a paddle solidly attached to the
grip handle to optimize its performance in aquatic activities.
Keywords
Manufactura aditiva, Ingeniería inversa, Prótesis, Fotogrametría
Citation
Basurto Chiriboga, Luis Josue (2024). "Diseño y fabricación de un prototipo de una prótesis para amputaciones de tipo transhumeral que facilite la natación". Quevedo. UTEQ. 144p.